Coax Cable - What You Need to Know

From FreeTV.Info
Revision as of 14:17, 16 January 2024 by Jkrus10414 (talk | contribs)

Often overlooked, the coax cable within a TV system is just as important as each of the other components. Not all coax cable is the same. This page will explain the different types of coax cable and explain which coax cable is the most preferred to use within your TV system. There are three different types of coax cable often used. They are RG-6, RG-11, and RG-59. The major differences include how much shielding the cable contains, size of the center conductor, and the material type of the center conductor.

RG-59 coax cable is the smallest, thinnest, and the cheapest cable when compared to RG-6 and RG-11. The RG-59 cable contains only one, thin layer of shielding. The copper-clad conductor is NOT solid copper. Instead, the center conductor is made of copper-clad. Copper-clad is a much cheaper and less effective material than solid copper. A thin layer of copper is around the outer edge of the cheaper material. This is one reason why RG-59 causes a significant amount of signal loss within a TV system. A good coax cable will contain a solid copper center conductor. This is one reason why RG-59 cable should not be used within a TV system. Secondly, RG-59 normally contains only one small layer of shielding. This is not enough shielding to keep away interference from the sun, weather, and other electronic devices. With all of the signal loss and the high susceptibility of adding interference, the RG-59 coax cable is NOT recommended for use within an over-the-air TV system.

RG-6 coax cable can include a solid copper center conductor. The RG-6 coax cable can also come with either dual layer shielding or quad layer shielding. If you are running a coax cable with a length less than 100 feet, the RG-6 quad-shield if the preferred cable that should be used within a TV system.

Coax Cable Specifications
Characteristic RG6 RG11 RG59
Center Conductor Size: 18 AWG 14 AWG 22 AWG
Center Material: Solid Copper Solid Copper Copper Clad
Maximum Distance: 100 ft. 400 ft. ----
Diameter: 0.275 in. 0.405 in. 0.242 in.
Shielding: Two-Layer & Quad-Layer Three-Layer & Quad-Layer One Thin Layer
* Signal Loss: 6 dB/100 ft. 2.5 dB/100 ft. 10.9 dB / 100 ft.
Impedance: 75 ohms 75 ohms 75 ohms
Flexibility: More Flexible Less Flexible Very Flexible
Bandwidth: 1 Ghz 3 Ghz ----
       * - Calculated at 539 Mhz. This is directly in the middle of the UHF band (470 Mhz.-608 Mhz.)